Übersetzung für "multilayer boards" auf finnisch
Übersetzungsbeispiele
Solid Wood Multilayer Board, Also K...
Piirilevy PCB Solid Wood monikerroslevyjen, tunne...
Previous: Solid Wood Multilayer Board, Also Known As Plywood
Pari: Solid Wood monikerroslevyjen, tunnetaan myös nimellä vaneri
Multilayer Board Of The Mainstream Manufacturing Method - News - Longjiang Circuit International Limited pycckий
Monikerroslevyjen käytön arvo - Uutiset - Longjiang piiri International Limited
This method is also applied to later multilayer boards. [1
Tätä menetelmää käytetään myös myöhemmissä monikerroksisissa levyissä. [1
The traces of each layer on the multilayer board should be perpendicular to each other to reduce coupling, and avoid alignment or balance of the upper and lower traces.
Monikerroksisen levyn kunkin kerroksen jälkien tulee olla kohtisuorassa toisiinsa kytkemisen vähentämiseksi ja ylemmän ja alemman jäljen kohdistamisen tai tasapainon välttämiseksi.
When it is buried in the internal layers of the multilayer board and becomes an "internal via hole", and it is not "connected" with the outer layer board, it is called a buried via hole or simply a buried hole.
Tarkoittaa monikerroksisen levyn paikallista reikää. Kun se haudataan monikerroslevyn sisäisiin kerroksiin ja siitä tulee "sisäinen läpivientireikä" eikä sitä ole "kytketty" ulkokerroslevyyn, sitä kutsutaan haudatun reiän kautta tai yksinkertaisesti haudattua reikää.
Refers to the inner layer of the multilayer board, if you do not want its conductor surface to communicate with the hole wall of the through hole, the copper foil around the through hole can be etched away to form an empty ring, which is called "empty ring".
Viittaa monikerroksisen levyn sisäkerrokseen, jos et halua sen johtimen pinnan olevan yhteydessä läpivientireiän reikäseinämään, läpivientireiän ympärillä oleva kuparifolio voidaan syövyttää tyhjän renkaan muodostamiseksi, jota kutsutaan " tyhjä rengas ".
Therefore, in a high-frequency circuit, don't think that if you place a ground wire somewhere, this is "Lines" must be made with holes less than λ/20, with holes in the wiring, and "good grounding" with the ground plane of the multilayer board.
Siksi korkeassa taajuuspiirissä älä ajatele, että jos sijoitat maadoitusjohdon johonkin, tämä on "Linjat", joiden reikien on oltava alle λ / 20, joissa on reikiä johdotuksessa ja "hyvä maadoitus" monikerroksisen levyn maataso.
How many English words do you know?
Test your English vocabulary size, and measure how many words you know.
Online Test